Has the strength currently long gone out?
The strength outage indicator helps you to recognize if the strength delivers to the fridge has been reducing off and the freezer temperature has risen to 18°F (-8°C) or higher. When strength has been restored, “PO” again and again flashes at the show display screen and the purple Power Outage icon appears. When the indicator is on, all different manage and dispenser features are disabled till you affirm which you are privy to the strength outage.
Is the fridge in showroom or demo mode?
This mode (on a few models) is used whilst the fridge is on show in a retail shop or in case you need to show the cooling-off and deactivate all different features besides indoors lighting. In this mode, the manage panel will now no longer reply to maximum commands. frigidaire fridge parts online
If you by accident switch on Showroom mode, the word “Showroom” will mild up at the show (on a few models). The collection for exiting showroom mode varies via way of means of a model, so please check with your Owner's Manual for complete instructions.
Is the fridge in Sabbath mode?
Sabbath Mode (on a few models) is designed for the ones whose spiritual observances require turning off the lighting and dispensers. In Sabbath Mode, the temperature set factors to stay unchanged, however, the indoors and dispenser lighting flip off, all sounds and alarms are disabled, the dispenser show display screen backlight turns off, and the dispenser pads are disabled
The collection for exiting Sabbath mode varies via way of means of a model, so please check with your Owner's Manual for complete instructions.
Reset the fridge
If the manage panel continues to be now no longer responding, strive to reset the fridge as informed below. If the trouble persists, time table service.
Reset strength to the product:
Power unit down via way of means of turning off the circuit breaker(s) or unplugging the product for 5 - 10 minutes.
Power unit up via way of means of turning at the circuit breaker(s) or plugging the product lower back in. frigidaire refrigerator door panel
Ensure the cooling feature is growing to become on.
Test the manage panel functionality.
Step-via way of means of-Step Repair for a Refrigerator That’s Not Cold Enough
Before you name in equipment restore person:
1 Check the bloodless management. Be certain it's miles set to COLD. Normally, the temperature in the fridge must be approximately 37 ranges F.
2 Listen for the freezer fan in the freezer. When the freezer fan runs, it way the defrost timer and the bloodless manage withinside the fridge are each set to COOL.
3 Listen for the compressor fan (that allows you to additionally let you know in which the compressor is located—usually in the back of or underneath the fridge). Most of the time, whilst the freezer fan is operating, the compressor fan must additionally be operating. If one of the fanatics isn't always operating or the compressor is off, the fridge will provide little or no cooling or none at all.
